Device Tree • rpi4 serial port - uart to usb

Hi there,

So I have been reading about this now, and I am every time more confused so I thought I would ask here. After upgrading the OS on my pi4 (8gb version) it did not boot again, I believe the reason is networking as I cannot reach it.

I edited /boot/config.txt so that it readsAnd cmdline.txt to read:Wiring on my uart to usb device is correct and I am connecting to the pins as it should be, baud speed set to 11500, etc. I have tried various serial clients including tio in linux and putty in windows.

How can I use the serial indicated in the image? (uart in pins 6 GND, 8 TX, 10 RX)


Thanks in advance, any advice welcome.

Statistics: Posted by risc-v-pi — Fri Mar 08, 2024 3:59 pm

---