Compute Module • Error "no cameras available"

Hello,

I'm having trouble getting the RPI Camera Module 3 to work.
I'm using the Compute Module 4 (2GB RAM, 8GB eMMC) with the Baseboard from Waveshare CM4-IO-BASE-B.
I've just installed the following RPI image

Raspberry Pi OS with desktop

Release date: December 5th 2023
System: 64-bit
Kernel version: 6.1
Debian version: 12 (bookworm)
Size: 1,108MB

I connected a Camera Module 3 to CAM1 and another / same Camera to CAM0.
I did a sudo apt update, and sudo apt full-upgrade.

Then with the command "rpicam-hello" I get the Error "no cameras available".
The cameras are new, out of the box, and the connection is correct. (The same happens if I connect only one camera to the ports)

When I do the command "vcgencmd get_camera" I get:
supported=0 detected=0, libcamera interfaces=0

According to "https://www.raspberrypi.com/documentati ... -pi-camera", it doesn't seem necessary for me to make any additional configurations or changes to the config file. The config file is currently set to default.

Do I need to activate or install any drivers?

Thank you.

Statistics: Posted by epikao2 — Wed Mar 06, 2024 3:55 pm

---